LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> GX 470 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle >> Transmission Control Cable >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transmission Control Cable: Removal

  1. SEPARATE BATTERY NEGATIVE TERMINAL 
  2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY 
  3. REMOVE FLOOR SHIFT LEVER KNOB SUB-ASSEMBLY 
  4. REMOVE NO. 1 CONSOLE UPPER PANEL GARNISH  (See REMOVAL )
  5. REMOVE NO. 2 CONSOLE UPPER PANEL GARNISH  (See REMOVAL )
  6. REMOVE UPPER CONSOLE PANEL ASSEMBLY  (See REMOVAL )
  7. SEPARATE TRANSMISSION CONTROL CABLE ASSEMBLY 
    1. Remove the nut and clip, separate the transmission control cable assembly from the transmission control cable bracket.
      Fig 1: Locating Transmission Control Cable Assembly
      G05261372Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove clip, separate the transmission control cable assembly from the floor shift lever assembly.

      HINT:

      When the transmission control cable end is pressed, it can be removed from the floor shift lever.

      NOTE: The nut may be loosened (up to approx. 1 mm), however, never remove it.
      Fig 2: Locating Transmission Control Cable Assembly
      G05261345Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY 
    1. Remove the 4 nuts and pull out the transmission control cable assembly.
scientia non olet · About LEMON Manuals