Inspection Procedure

CHECK TOUCH PANEL
1. Check for foreign matter on the display.
  OK:
  
  The display is clean.
NG: CLEAN DISPLAY AND RECHECK TOUCH PANEL

OK: Go to next step
CHECK TOUCH SWITCH (DISPLAY CHECK MODE)
1. Enter the "Display Check" mode (Touch Switch Check) (See DISPLAY CHECK MODE ).
2. Touch the display in the area where the switch malfunction occurs.
  OK:
  
  A "+" mark appears at the touched position.
  
  Fig 1: Screen Display - Touch Switch Check
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
NG: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE

OK: REPLACE MULTI-DISPLAY