LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> IS 250 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Audio/Visual) >> Radio Receiver >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Radio Receiver: Removal

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY  (See REMOVAL )
  2. REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH  (See REMOVAL )
  3. REMOVE UPPER NO. 2 CONSOLE PANEL GARNISH  (See REMOVAL )
  4. REMOVE CONSOLE PANEL SUB-ASSEMBLY  (See REMOVAL )
  5. REMOVE FRONT ASH RECEPTACLE ASSEMBLY  (See REMOVAL )
  6. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY  (See REMOVAL )
  7. REMOVE CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL  (See REMOVAL )
  8. REMOVE INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System) 
    1. Remove the 4 bolts.
    2. Pull the integration control panel with radio receiver assembly toward the rear of the vehicle.
    3. Disconnect each connector and remove the panel.
      Fig 1: Locating Integration Control Panel Bolts
      G05753400Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. REMOVE NO. 1 RADIO BRACKET (w/o Navigation System) 
    1. Remove the 6 bolts and No. 1 radio bracket
      Fig 2: Locating No. 1 Radio Bracket Bolts
      G05753401Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  10. REMOVE NO. 2 RADIO BRACKET (w/o Navigation System) 
    1. Remove the 6 bolts and No. 2 radio bracket.
      Fig 3: Locating No. 2 Radio Bracket Bolts
      G05753402Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  11. REMOVE RADIO RECEIVER ASSEMBLY (w/o Navigation System) 
    1. Slide the integration control panel in the direction shown by the arrow to remove the radio receiver assembly
      Fig 4: Removing Radio Receiver Assembly (W/O Navigation System)
      G05753403Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  12. REMOVE MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Navigation System) 
    1. Remove the 4 bolts.
    2. Pull the multi-display with radio receiver assembly toward the rear of the vehicle.
    3. Disconnect each connector and remove the multi-display.
      Fig 5: Locating Multi-Display With Radio Receiver Assembly Bolts
      G05753404Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  13. REMOVE NO. 1 RADIO BRACKET (w/ Navigation System) 
    1. Disengage the connector clamp.
      Fig 6: Identifying Connector Clamp
      G05753405Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 7 bolts and No. 1 radio bracket
      Fig 7: Locating No. 1 Radio Bracket Bolts
      G05753406Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  14. REMOVE NO. 2 RADIO BRACKET (w/ Navigation System) 
    1. Remove the 7 bolts and No. 2 radio bracket
      Fig 8: Locating No. 2 Radio Bracket Bolts
      G05753407Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  15. REMOVE RADIO RECEIVER ASSEMBLY (w/ Navigation System) 
    1. Slide the multi-display in the direction shown by the arrow to remove the radio receiver assembly.
      Fig 9: Removing Radio Receiver Assembly (W/ Navigation System)
      G05753408Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals