LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> IS 250 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Navigation) >> Navigation System >> Cursor or Map Rotates when Vehicle Stopped >> Inspection Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Procedure

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK CONDITION 
    1. Check with the customer if the vehicle has been turned by a turntable.

      OK: Vehicle has not been turned by turntable. 

      HINT

      If the vehicle is turned on a turntable with the engine switch on (IG), the system may store the angular velocity As a result, the vehicle position cursor may deviate

    2. Fig 1: Checking Vehicle Stopped Condition
      G04945346Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

    NG: TURN ENGINE SWITCH ON (IG) WHEN VEHICLE IS COMPLETELY STOPPED 

    OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE  (See PROBLEM SYMPTOMS TABLE  )