LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> IS 250 AWD >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt >> Front Seat Inner Belt Assembly >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Seat Inner Belt Assembly: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (for Manual Seat) 
    NOTE: Wait for 90 seconds after disconnecting the cable to prevent airbag and seat belt pretensioner deployment. (See PRECAUTION )
  2. REMOVE FRONT SEAT HEADREST ASSEMBLY 
  3. REMOVE FRONT OUTER SEAT TRACK BRACKET COVER (for Manual Seat)  (See REMOVAL )
  4. REMOVE FRONT INNER SEAT TRACK BRACKET COVER (for Manual Seat)  (See REMOVAL )
  5. REMOVE REAR OUTER SEAT TRACK COVER (for Manual Seat)  (See REMOVAL )
  6. REMOVE REAR INNER SEAT TRACK COVER (for Manual Seat)  (See REMOVAL )
  7. REMOVE FRONT SEAT ASSEMBLY (for Manual Seat)  (See REMOVAL )
  8. REMOVE FRONT OUTER SEAT TRACK BRACKET COVER (for Power Seat)  (See REMOVAL )
  9. REMOVE FRONT INNER SEAT TRACK BRACKET COVER (for Power Seat) 
  10. REMOVE REAR OUTER SEAT TRACK COVER (for Power Seat)  (See REMOVAL )
  11. REMOVE REAR INNER SEAT TRACK COVER (for Power Seat) 
  12. REMOVE FRONT SEAT ASSEMBLY (for Power Seat)  (See REMOVAL )
  13. REMOVE FRONT SEAT INNER BELT ASSEMBLY 
    1. Disconnect the connectors and detach the clamps.
    2. Remove the nut and front seat inner belt assembly.
      Fig 1: Identifying Front Seat Inner Belt Assembly Nut
      G05320152Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals