Skid Control Buzzer: Installation

INSTALL SKID CONTROL BUZZER ASSEMBLY
1. Attach the claw and install the skid control buzzer assembly.
2. Connect the skid control buzzer assembly connector.
  
  Fig 1: Identifying Skid Control Buzzer Assembly Claw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY (See INSTALLATION )
INSTALL LOWER INSTRUMENT FINISH PANEL SUB-ASSEMBLY (See INSTALLATION )
INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (See INSTALLATION )
INSTALL SIDE INSTRUMENT PANEL LH (See INSTALLATION )
CONNECT BATTERY NEGATIVE TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected. (See INITIALIZATION )
INSPECT SRS WARNING LIGHT
HINT:

(See DIAGNOSIS SYSTEM ).