Rear Speed Sensor: Installation

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL REAR SPEED SENSOR
1. Install the rear speed sensor with the bolt
  Torque: 8.5 N*m (87 kgf*cm, 75 in.*lbf)
  
  NOTE: Prevent foreign matter from attaching to the sensor tip.
  
  Fig 1: Locating Bolt And Rear Speed Sensor
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR SPEED SENSOR WIRE
1. Connect the rear speed sensor wire.
INSTALL REAR WHEEL
1. Install the rear wheel.
  Torque: 103 N*m (1050 kgf*cm, 76 ft.*lbf)
CHECK FOR SPEED SENSOR SIGNAL
(See TEST MODE PROCEDURE )

Fig 2: Locating Rear Speed Sensor Wire
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002