VSC Off Switch: Installation

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL VSC OFF SWITCH
1. Engage the 2 claws and install the VSC off switch to the switch base.
  
  Fig 1: Locating Claws Of VSC OFF Switch
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Engage the 4 claws and install the VSC off switch the with switch base to the lower instrument panel finish panel sub-assembly.
INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (See INSTALLATION )
INSTALL SIDE INSTRUMENT PANEL LH (See INSTALLATION )
INSTALL FRONT DOOR OPENING TRIM COVER LH (See INSTALLATION )
INSTALL FRONT DOOR SCUFF PLATE LH (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).

Fig 2: Identifying Claws Of VSC OFF Switch
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002