On-Vehicle Inspection

INSPECT DEFOGGER RELAY (Marking: DEFOG)

Measure the resistance of the DEFOG relay.

Fig 1: Identifying Defogger Relay Connector Terminals

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Standard

TERMINAL SPECIFIED CONDITION

Tester Condition	Specified Condition
3-4	Below 1 Ω (when battery voltage Is not applied between terminals)
3-5	10 kΩ or higher (when battery voltage is not applied between terminals)
3-5	Below 1 Ω (when battery voltage is applied to terminals 1 and 2)

If the result is not as specified, replace the relay.