DTC Check/Clear
- CHECK DTC
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Powertrain / Radar Cruise / Trouble Codes.
- Check the details of the DTC(s) (See DIAGNOSTIC TROUBLE CODE CHART ).
- CLEAR DTC
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Powertrain / Radar Cruise / Trouble Codes.
- Clear the DTCs.