LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> IS 350 >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control >> Abs Motor Relay >> On-Vehicle Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

On-Vehicle Inspection

  1. INSPECT ABS MOTOR1 RELAY 
    1. Remove the ABS MOTOR1 relay.
    2. Measure the resistance according to the value(s) in the table below.
      Fig 1: Inspecting ABS MOTOR1 Relay
      G05296924Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard resistance 

      STANDARD RESISTANCE REFERENCE CHART

      Tester Connection Specified Condition
      1-2 Below 1 Ω
      3-5 10 kΩ or higher (When battery voltage is not applied between terminals)
      3-5 Below 1 Ω (When battery voltage is applied to terminals 1 and 2)

      If the value is not as specified, replace the ABS MOTOR1 relay.

  2. INSPECT ABS MOTOR2 RELAY 
    1. Remove the ABS MOTOR2 relay.
    2. Measure the resistance according to the value(s) in the table below.

      Standard resistance 

      STANDARD RESISTANCE REFERENCE CHART

      Tester Connection Specified Condition
      1-2 Below 1 Ω
      3-5 10 kΩ or higher (When battery voltage is not applied between terminals)
      3-5 Below 1 Ω (When battery voltage is applied to terminals 1 and 2)
      Fig 2: Inspecting ABS MOTOR2 Relay
      G05296923Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      If the value is not as specified, replace the ABS MOTOR2 relay.

scientia non olet · About LEMON Manuals