LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> IS 350 >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control >> Skid Control Buzzer >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Skid Control Buzzer: Removal

  1. PRECAUTION 
    CAUTION: Be sure to read the "PRECAUTION" thoroughly before servicing (See PRECAUTION ).
  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait for 90 seconds after disconnecting the cable to prevent the airbag working.
    NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected. (See INITIALIZATION )
  3. REMOVE SIDE INSTRUMENT PANEL LH  (See REMOVAL )
  4. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY  (See REMOVAL )
  5. REMOVE LOWER INSTRUMENT FINISH PANEL SUB-ASSEMBLY  (See REMOVAL )
  6. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY  (See REMOVAL )
  7. REMOVE SKID CONTROL BUZZER ASSEMBLY 
    1. Remove the clip and skid control buzzer assembly.
      Fig 1: Identifying Skid Control Buzzer Assembly Clip
      G05319606Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals