Combination Meter: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait for 90 seconds after disconnecting the cable to prevent airbag deployment (See PRECAUTION ).
REMOVE STEERING COLUMN COVER (for Manual Tilt and Telescopic) (See REMOVAL )
REMOVE STEERING COLUMN COVER (for Power Tilt and Power Telescopic) (See REMOVAL )
REMOVE FRONT DOOR SCUFF PLATE LH (w/o Illumination) (See REMOVAL )
REMOVE FRONT DOOR SCUFF PLATE LH (w/ Illumination) (See REMOVAL )
REMOVE FRONT DOOR OPENING TRIM COVER LH (See REMOVAL )
REMOVE SIDE INSTRUMENT PANEL LH (See REMOVAL )
REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (See REMOVAL )
REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
1. Disengage the 2 clips.
  
  Fig 1: Identifying Instrument Cluster Finish Panel Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 2 screws and remove the instrument cluster finish panel sub-assembly.
REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY (See REMOVAL )

Fig 2: Locating Instrument Cluster Finish Panel Sub-Assembly And Screws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE COMBINATION METER ASSEMBLY
1. Attach protective tape to the position indicated in the illustration.
  
  Fig 3: Identifying Protective Tape
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using a screwdriver, disengage the claw.
  HINT:
  
  Tape the screwdriver tip before use.
  
  Fig 4: Disengaging Claw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Using a screwdriver, disengage the claw, pull out the combination meter assembly.
  HINT:
  
  Tape the screwdriver tip before use.
  
  Fig 5: Disengaging Claw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Disconnect the connectors and remove the combination meter assembly as shown in the illustration.
  NOTE: Do not damage the instrument panel safety pad or combination meter assembly when removing the combination meter assembly.
  
  Fig 6: Locating Combination Meter
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE COMBINATION METER GLASS
1. Disengage the 9 claws and remove the combination meter glass.
  
  Fig 7: Identifying Combination Meter Glass Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002