LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> IS 350 >> Repair and Diagnosis >> Electrical >> Gauges >> Meter >> Satellite Switch >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Satellite Switch: Inspection

  1. INSPECT SATELLITE SWITCH 
    1. Disconnect the connector from the satellite switch.
    2. Measure the resistance between the terminals according to the value(s) in the table below.

      Standard resistance 

      STANDARD RESISTANCE SPECIFICATION

      Tester Connection Condition Specified Condition
      J16-2 (LSET) - J16-5 (E) Satellite switch LH is pressed Below 1 Ω
      J16-2 (LSET) - J16-5 (E) Satellite switch LH is not pressed 10 kΩ or higher
      J16-3 (SET) - J16-5 (E) Satellite switch ON/OFF is pressed Below 1 Ω
      J16-3 (SET) - J16-5 (E) Satellite switch ON/OFF is not pressed 10 kΩ or higher
      J16-4 (RSEL) - J16-5 (E) Satellite switch RH is pressed Below 1 Ω
      J16-4 (RSEL) - J16-5 (E) Satellite switch RH is not pressed 10 kΩ or higher
      Fig 1: Identifying Satellite Switch Connector
      G05320853Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      HINT:

      If the value is not as specified, replace the satellite switch.

scientia non olet · About LEMON Manuals