LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> IS 350 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (2GR-FSE) - System And Component Testing, On-Vehicle Inspection, Removal, Inspection & Installation >> Mass Air Flow Meter >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Mass Air Flow Meter: Removal

  1. REMOVE COOL AIR INTAKE DUCT SEAL  (See REMOVAL )
  2. REMOVE ENGINE ROOM SIDE COVER RH  (See REMOVAL )
  3. REMOVE MASS AIR FLOW METER 
    1. Disconnect the MAF meter connector.
      Fig 1: Locating MAF Meter Connector And Clamp
      G05285374Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 screws and MAF meter.
    3. Remove the O-ring from the MAF meter.
    Fig 2: Locating MAF Meter And Screws
    G05316197Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals