LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> IS 350 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (2GR-FSE) - System And Component Testing, On-Vehicle Inspection, Removal, Inspection & Installation >> VVT Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

VVT Sensor: Removal

  1. REMOVE V-BANK COVER SUB-ASSEMBLY  (See REMOVAL )
  2. REMOVE VVT SENSOR (for Intake Side of Bank 1) 
    1. Disconnect the VVT sensor connector.
    2. Remove the bolt and VVT sensor.
    Fig 1: Locating VVT Sensor Connector And Bolt
    G05285349Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE VVT SENSOR (for Exhaust Side of Bank 1) 
    1. Disconnect the VVT sensor connector.
    2. Remove the bolt and VVT sensor.
    Fig 2: Locating VVT Sensor Connector And Bolt
    G05316224Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE VVT SENSOR (for Intake Side of Bank 2) 
    1. Disconnect the VVT sensor connector.
    2. Remove the bolt and VVT sensor.
    Fig 3: Locating VVT Sensor Connector And Bolt
    G05822876Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE VVT SENSOR (for Exhaust Side of Bank 2) 
    1. Disconnect the VVT sensor connector.
    2. Remove the bolt and VVT sensor.
    Fig 4: Locating VVT Sensor Connector And Bolt
    G05316226Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals