Rear Speed Sensor: Removal

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

HINT.

Use the same procedure for the RH side and LH side
The procedure listed below is for the LH side.
If the sensor rotor needs to be replaced, replace it together with the rear axle hub and bearing assembly.

REMOVE REAR WHEEL
REMOVE REAR SPEED SENSOR WIRE
1. Using a screwdriver, disconnect the rear speed sensor wire
  
  Fig 1: Disconnecting Rear Speed Sensor Wire
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE REAR SPEED SENSOR
1. Remove the bolt and rear speed sensor
  NOTE: Prevent foreign matter from attaching to the sensor tip.
  
  Fig 2: Locating Bolt And Rear Speed Sensor
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002