Skid Control Buzzer: Inspection

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT SKID CONTROL BUZZER
1. Apply battery negative voltage to terminal 1, and battery positive voltage to terminal 2 of the skid control buzzer, and check that the buzzer sounds.
  OK: Skid control buzzer sounds.
  
  Fig 1: Identifying Clip Of Skid Control Buzzer
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  HINT
  
  If the result is not as specified, replace the skid control buzzer
  
  Fig 2: Inspecting Skid Control Buzzer
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002