Skid Control Buzzer: Installation

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL SKID CONTROL BUZZER
1. Attach the clip and install the skid control buzzer
  
  Fig 1: Identifying Clip Of Skid Control Buzzer
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the skid control buzzer connector.
INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (See INSTALLATION )
INSTALL SIDE INSTRUMENT PANEL LH (See INSTALLATION )
INSTALL FRONT DOOR OPENING TRIM COVER LH (See INSTALLATION )
INSTALL FRONT DOOR SCUFF PLATE LH (See INSTALLATION )

Fig 2: Locating Skid Control Buzzer Connector
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).