DTC C1267/67 Brake Pedal Load Sensing Switch: Description
WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
The brake pedal load sensing switch is turned on when the brake pedal is depressed with force exceeding a predetermined level
The skid control ECU detects if the brake pedal is depressed or not via this circuit.
DTC DETECTION CONDITION
| DTC Code |
DTC Detection Condition |
Trouble Area |
| C1267/67 |
Any of the following is detected
- An open or short in the brake pedal load sensing switch continues for 0 3 seconds or more
- Immediately after the engine switch is turned on (IG), the brake pedal load sensing switch is ON and the stop light switch is OFF for 10 seconds or more
- While the vehicle speed changes from 0 km/h (0 mph) to 30 km/h (18 mph), the condition that the brake pedal load sensing switch remains ON occurs 5 times in succession
- With the stop light switch ON, the brake pedal load sensing switch OFF, and the master cylinder pressure 6 MPa or more, the deceleration is 0 4 G or more for 1 second or more
- With the stop light switch ON, the brake pedal load sensing switch OFF, and the master cylinder pressure 6 MPa or more, the vehicle speed is 0 km/h (0 mph) for 5 seconds or more
|
- Brake pedal load sensing switch
- Brake pedal load sensing switch circuit
|