Radio Receiver: Installation

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL RADIO RECEIVER ASSEMBLY (w/o Navigation System)
1. Install the radio receiver assembly as shown in the illustration.
  
  Fig 1: Installing Radio Receiver Assembly (W/O Navigation System)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 2 RADIO BRACKET (w/o Navigation System)
1. Install the No. 2 radio bracket with the 6 bolts.
  
  Fig 2: Locating No. 2 Radio Bracket Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 1 RADIO BRACKET (w/o Navigation System)
1. Install the No. 1 radio bracket with the 6 bolts.
Fig 3: Locating No. 1 Radio Bracket Bolts
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System)
1. Connect each connector
2. Install the integration control panel with radio receiver assembly with the 4 bolts.
  
  Fig 4: Locating Integration Control Panel Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL RADIO RECEIVER ASSEMBLY (w/ Navigation System)
1. Install the radio receiver assembly as shown in the illustration.
  
  Fig 5: Installing Radio Receiver Assembly (W/ Navigation System)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 2 RADIO BRACKET (w/ Navigation System)
1. Install the No. 2 radio bracket with the 7 bolts.
  
  Fig 6: Locating No. 2 Radio Bracket Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 1 RADIO BRACKET (w/ Navigation System)
1. Install the No. 1 radio bracket with the 7 bolts.
  
  Fig 7: Locating No. 1 Radio Bracket Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Engage the connector clamp.
Fig 8: Identifying Connector Clamp
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Navigation System)
1. Connect each connector
2. Install the the multi-display with radio receiver assembly with the 4 bolts.
Fig 9: Locating Multi-Display With Radio Receiver Assembly Bolts
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL (See INSTALLATION )
INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY (See INSTALLATION )
INSTALL FRONT ASH RECEPTACLE ASSEMBLY (See INSTALLATION )
INSTALL CONSOLE PANEL SUB-ASSEMBLY (See INSTALLATION )
INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH (See INSTALLATION )
INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH (See INSTALLATION )
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (See INSTALLATION )
ADJUST CLOCK