LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> IS 350 >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Networking) >> Can Communication System >> Seat Belt Control ECU Communication Stop Mode >> Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Seat Belt Control ECU Communication Stop Mode: Description

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
DTC DETECTION CONDITION CHART

Detection Item Symptom Trouble Area
Seat Belt Control ECU Communication Stop Mode
  • "Pre-Collision" is not displayed on the "CAN Bus Check" screen of the Techstream
  • Applies to "Seat Belt Control ECU Communication Stop Mode" in the "DTC COMBINATION TABLE"
  • Power source circuit of the seat belt control ECU
  • Seat belt control ECU branch line or connector
  • Seat belt control ECU

HINT:

"Pre-Collision" refers to the circuit that includes the seat belt control ECU

scientia non olet · About LEMON Manuals