Vehicle Speed Signal Circuit between Navigation ECU and Multi-Display: Description

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

The navigation ECU receives a vehicle speed signal from the multi-display and information from the GPS antenna, and then adjusts vehicle position

HINT:

A voltage of 12 V or 5 V is output from each ECU and then input to the combination meter. The signal is changed to a pulse signal at the transistor in the combination meter Each ECU controls the respective system based on the pulse signal.
If a short occurs in an ECU, all systems in the diagram below will not operate normally