Service Data
WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
BRAKE CONTROL AND DYNAMIC CONTROL SYSTEMS - SERVICE DATA
| VSC off switch | Resistance 3-4 | Pressed | Below 1 Ω |
| Not pressed | 10 kΩ or higher | ||
| Brake pedal load sensing switch | Resistance 1-2 | Brake pedal load sensing switch OFF (Brake pedal depressed) | 950 to 1050 Ω |
| Brake pedal load sensing switch ON (Brake pedal released) | 203 to 223 Ω | ||
| ABS motor relay (ABS MOTOR1 (fail safe)) | Resistance 3-5 | Battery voltage is not applied between terminals 1 and 2 | 10 kΩ or higher |
| Battery voltage is applied between terminals 1 and 2 | Below 1 Ω | ||
| ABS motor relay (ABS MOTOR3) | Resistance 3-5 | Battery voltage is not applied between terminals 1 and 2 | 10 kΩ or higher |
| Battery voltage is applied between terminals 1 and 2 | Below 1 Ω | ||
| Stop light control relay (BRK-LP) | Resistance 3-4 | Battery voltage is not applied between terminals 1 and 2 | Below 1 Ω |
| Battery voltage is applied between terminals 1 and 2 | 10 kΩ or higher | ||
| Resistance 3-5 | Battery voltage is not applied between terminals 1 and 2 | 10 kΩ or higher | |
| Battery voltage is applied between terminals 1 and 2 | Below 1 Ω | ||
| ABS solenoid relay (ABS SOL) | Resistance 3-5 | Battery voltage is not applied between terminals 1 and 2 | 10 kΩ or higher |
| Battery voltage is applied between terminals 1 and 2 | Below 1 Ω |