Skid Control Buzzer: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
REMOVE FRONT DOOR SCUFF PLATE LH (See REMOVAL )
REMOVE FRONT DOOR OPENING TRIM COVER LH (See REMOVAL )
REMOVE SIDE INSTRUMENT PANEL LH (See REMOVAL )
REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (See REMOVAL )
REMOVE SKID CONTROL BUZZER
1. Disconnect the skid control buzzer connector.
  
  Fig 1: Locating Skid Control Buzzer Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the clip and skid control buzzer