Door Control Switch: Inspection
- INSPECT DOOR CONTROL SWITCH ASSEMBLY
- Measure the resistance according to the value(s) in the table below
Standard Resistance
TESTER CONNECTION SPECIFIED CONDITIONTester Connection Switch Condition Specified Condition 3 (L) - 2 (E) Lock Below 1 Ω 3 (L) - 2 (E) Off 10 kΩ or higher 1 (UL) - 2 (E) Unlock Below 1 Ω 1 (UL) - 2 (E) Off 10 kΩ or higher If the result is not as specified, replace the door control switch assembly
- Measure the resistance according to the value(s) in the table below