Door Control Transmitter: Installation

INSTALL TRANSMITTER BATTERY
1. Install a new battery in the slot at an angle with the positive side facing up
2. Press down on the battery to set it in place
  NOTE:
  - Be sure that the positive side and the negative side of the transmitter battery are matched correctly.
  - Be careful not to bend the transmitter battery electrode while installing the battery.
  - Keep the interior of the transmitter case free of dust, water and oil.
    
    Fig 1: Installing Battery
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the cover by pressing down on it as shown in the illustration
  NOTE: Be sure not to press on the "F" emblem.
  
  Fig 2: Locating Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Install the mechanical key.
  HINT
  
  After the installation, press one of the transmitter's switches and check that the LED illuminates.
  
  Fig 3: Installing Mechanical Key
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002