April 5, 2026: LEMON Manuals is launched! Read the announcement.

Customize Parameters

CUSTOMIZING FUNCTION WITH TECHSTREAM

HINT

The following items can be customized

NOTE:

When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.

Connect the Techstream to the DLC3.
Turn the engine switch on (IG)
Turn the Techstream on
Enter the following menus. Customize Setting

Select the setting by referring to the table below.

Door Lock

DATA LIST

Display	Default	Contents	Setting
Unlock Key Twice	ON	Function that unlocks only the driver side door when the driver side door key cylinder is turned to unlock once, and unlock all doors when it is turned to unlock twice For the OFF setting, turning it once unlocks all doors	ON/OFF
Auto Lock	OFF	Function that locks all doors when the vehicle speed reaches a certain level	ON/OFF
Auto Lock/Shift	ON	With the engine running and all doors closed, function that locks all doors when the shift lever is moved from P to any position other than P	ON/OFF
Auto Unlock/Shift	ON	Function that unlocks all doors when the shift lever is moved to P from any position other than P while the engine switch is on (IG)	ON/OFF
All Unlock/Open-Close	OFF	Function that unlocks the other doors when the driver side door is opened within 10 seconds after the engine switch is turned off	ON/OFF