Data List / Active Test
- DATA LIST
HINT
Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed Reading the Data List information early in troubleshooting is one way to save diagnostic time
NOTE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG)
- Turn the Techstream on
- Enter the following menus Body Electrical / Body or Master Switch / Data List
- Read the Data List according to the display on the Techstream
Body (Main Body ECU RH (Cowl Side Junction Block RH))
DATA LISTTester Display Measurement Item/Range Normal Condition Diagnostic Note D Door Courtesy SW Driver side door courtesy light switch signal/ON or OFF ON Driver side door is OPEN
OFF Driver side door is CLOSED- P Door Courtesy SW Passenger side door courtesy light switch signal/ON or OFF ON Passenger side door is OPEN
OFF Passenger side door is CLOSED- Passenger Lock Pos SW Front passenger side door lock position switch signal/ON or OFF ON Front passenger side door is locked
OFF Front passenger side door is unlocked- Rear Door Courtesy SW Rear door courtesy light switch signal/ON or OFF ON Rear door is OPEN
OFF Rear door is CLOSED- Rear Lock Position SW Rear door lock position switch signal/ON or OFF ON Rear door is locked
OFF Rear door is unlocked- Door Lock SW-Lock Front passenger side door control switch lock signal/ON or OFF ON Front passenger side door control switch is pushed to lock position
OFF Front passenger side door control switch is not pushed to lock position- Door Unlock SW-Unlock Front passenger side door control switch unlock signal/ON or OFF ON Front passenger side door control switch is pushed to unlock position
OFF Front passenger side door control switch is not pushed to unlock position- Unlock Key Twice Key-linked 2-step unlock function/ ON or OFF Customized value displayed - Auto Lock Speed-sensitive automatic door lock function/ON or OFF Customized value displayed - Auto Lock/Shift Shift-linked automatic door lock function/ON or OFF Customized value displayed - Auto Unlock/Shift Shift-linked automatic door unlock function/ON or OFF Customized value displayed - All Unlock/Open-Close Driver door-linked automatic door unlock function/ON or OFF Customized value displayed - Master Switch (Multiplex Network Master Switch Assembly)
DATA LISTTester Display Measurement Item/Range Normal Condition Diagnostic Note Door Lock SW Driver side door control switch lock signal/ON or OFF ON Door control switch is pushed to lock position
OFF Door control switch is not pushed to lock position- Door Unlock SW Driver side door control switch unlock signal/ON or OFF ON Door control switch is pushed to unlock position
OFF Door control switch is not pushed to unlock position- Lock Pos SW Driver side door unlock detection switch signal/ON or OFF ON Driver side door is unlocked
OFF Driver side door is locked- Door Key Lock Driver door lock/unlock switch lock signal (key-linked lock switch) /ON or OFF ON Driver side door key cylinder is turned to lock position
OFF Driver side door key cylinder is not turned- Door Key Unlock Driver door lock/unlock switch unlock signal (key-linked unlock switch) /ON or OFF ON Driver side door key cylinder is turned to unlock position
OFF Driver side door key cylinder is not turned-
- ACTIVE TEST
HINT
Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed Performing Active Tests early in troubleshooting is one way to save diagnostic time Data List information can be displayed while performing Active Tests
- Connect the Techstream to the DLC3
- Turn the engine switch on (IG)
- Turn the Techstream on
- Enter the following menus Body Electrical / Body / Active Test
- Perform the Active Test according to the display on the Techstream
Body (Main Body ECU RH (Cowl Side Junction Block RH))
DATA LISTTester Display Test Part Control Range Diagnostic Note Door Lock Operate door lock motor LOCK/UNLOCK - Shock Detection Unlock Operate door lock motor ON/OFF -