DTC C1267/67 Brake Pedal Load Sensing Switch: Description
The brake pedal load sensing switch is turned on when the brake pedal is depressed with force exceeding a predetermined level
The skid control ECU detects if the brake pedal is depressed or not via this circuit.
DTC DETECTION CONDITION
| DTC Code |
DTC Detection Condition |
Trouble Area |
| C1267/67 |
Any of the following is detected
- An open or short in the brake pedal load sensing switch continues for 0 3 seconds or more
- Immediately after the engine switch is turned on (IG), the brake pedal load sensing switch is ON and the stop light switch is OFF for 10 seconds or more
- While the vehicle speed changes from 0 km/h (0 mph) to 30 km/h (18 mph), the condition that the brake pedal load sensing switch remains ON occurs 5 times in succession
- With the stop light switch ON, the brake pedal load sensing switch OFF, and the master cylinder pressure 6 MPa or more, the deceleration is 0 4 G or more for 1 second or more
- With the stop light switch ON, the brake pedal load sensing switch OFF, and the master cylinder pressure 6 MPa or more, the vehicle speed is 0 km/h (0 mph) for 5 seconds or more
|
- Brake pedal load sensing switch
- Brake pedal load sensing switch circuit
|