Scavenging Pump: Installation

1. Temporarily install the scavenging pump assembly and a new gasket with the 6 bolts.
2. Using several steps, uniformly install and tighten the 6 bolts in the sequence shown in the illustration.

   Torque: 23 N*m (235 kgf*cm, 17 ft.*lbf) 

Fig 1: Locating Scavenging Pump Assembly Bolts

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Install a new O-ring to the No 3 oil pipe.
2. Connect the No 3 oil pipe to the scavenging pump assembly and align the bolt holes.
   NOTE:

   • Be careful not to damage the O-ring.
   • Do not rotate the oil pipe when connecting it to the scavenging pump.
3. Install the No. 3 oil pipe with the 2 bolts

   Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

Fig 2: Locating No. 3 Oil Pipe Bolts

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Install a new O-ring and oil pipe seal to the No. 2 oil pipe.
2. Connect the No 2 oil pipe to the scavenging pump assembly and align the bolt holes
   NOTE:

   • Be careful not to damage the O-ring.
   • Do not rotate the oil pipe when connecting it to the scavenging pump.
3. Install the No 2 oil pipe with the 2 bolts.

   Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

Fig 3: Locating No. 2 Oil Pipe Bolts

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Install a new O-ring and oil pipe seal to the No. 1 oil pipe.
2. Connect the No 1 oil pipe to the scavenging pump assembly and align the bolt holes.
   NOTE:

   • Be careful not to damage the O-ring.
   • Do not rotate the oil pipe when connecting it to the scavenging pump.
3. Install the No. 1 oil pipe with the 2 bolts.

   Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

Fig 4: Locating No. 1 Oil Pipe Bolts

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

HINT.

See INSTALLATION