LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> IS F >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel >> Fuel Pump Resistor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Pump Resistor: Removal

  1. REMOVE COOL AIR INTAKE DUCT SEAL  (See REMOVAL )
  2. REMOVE ENGINE ROOM SIDE COVER RH  (See REMOVAL )
  3. REMOVE FUEL PUMP RESISTOR 
    1. Disconnect the connector and clamp from the fuel pump resistor.
    2. Remove the bolt and disconnect the engine wire
      Fig 1: Locating Connector And Engine Wire Bolt
      G05750117Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the bolt and fuel pump resistor.
    Fig 2: Locating Fuel Pump Resistor Bolt
    G05750118Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals