Typical Enabling Conditions
TYPICAL ENABLING CONDITIONS CHART
| Monitor runs whenever following DTCs not present | P0115 - P0118 (Engine coolant temperature sensor) P0120 - P0223, P2135 (Throttle position sensor) P0125 (Insufficient engine coolant temperature for closed loop) P0335 (Crankshaft position sensor) P0340 (Camshaft position sensor) |
| Throttle position (Throttle position sensor voltage) | 0 24 V or more |
| Time after engine start | 5 seconds or more |
| Battery voltage | 10 5 V or more |
| Engine coolant temperature | 70°C (158°F) or more |
| Intake air temperature sensor circuit | OK |
| Engine coolant temperature sensor circuit | OK |
| Crankshaft position sensor circuit | OK |
| Throttle position sensor circuit | OK |
| Canister pressure sensor circuit | OK |
| EVAP leak detection pump | OK |
| EVAP vent valve | OK |