LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> IS F >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - SFI System Diagnostics (3 Of 4) >> DTC P060D Internal Control Module Accelerator Pedal Position Performance >> Inspection Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Procedure

  1. READ OUTPUT DTC (DTC P060D) 
    1. Connect the Techstream to the DLC3
    2. Turn the engine switch on (IG)
    3. Turn the Techstream ON.
    4. Clear DTCs (See DTC CHECK/CLEAR ).
    5. Turn the engine switch to off and turn the Techstream off.
    6. Disconnect the Techstream.
    7. Disconnect the cable from the negative (-) battery terminal and wait for 1 minute.
    8. Connect the cable to the negative (-) battery terminal
    9. Connect the Techstream to the DLC3.
    10. Turn the engine switch on (IG).
    11. Turn the Techstream ON.
    12. Enter the following menus. Powertrain / Engine / Trouble Codes.
    13. Read the DTCs

      Result 

      RESULT CHART

      Result Proceed to
      DTC is not output A
      DTC P060D is output B

    B: REPLACE ECM  (See REMOVAL )

    A: CHECK FOR INTERMITTENT PROBLEMS  (See CHECK FOR INTERMITTENT PROBLEMS )

scientia non olet · About LEMON Manuals