LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> IS F >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - System & Component Testing, R & I >> Camshaft Oil Control Valve >> On-Vehicle Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

On-Vehicle Inspection

  1. INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY 
    1. Connect the Techstream to the DLC3.
    2. Start the engine and turn the Techstream ON
    3. Warm up the engine
    4. Enter the following menus Powertrain / Engine / Active Test / Control the VVT Exhaust Linear (Bank 1) or Control the VVT Exhaust Linear (Bank 2).
    5. Check the engine speed while operating the Oil Control Valve (OCV) using the Techstream.

      Specified Condition 

      TESTER OPERATION SPECIFIED CONDITION CHART

      Tester Operation Specified Condition
      -100% Normal engine speed
      100% Engine idles roughly

      If the result is not as specified, check the oil control valve, wiring and camshaft timing exhaust gear

      HINT.

      • Control the VVT Exhaust Linear (Bank 1). Command to activate the exhaust side oil control valve of bank 1
      • Control the VVT Exhaust Linear (Bank 2) Command to activate the exhaust side oil control valve of bank 2.
scientia non olet · About LEMON Manuals