Service Data
Water inlet with thermostat
2UR-GSE COOLING (WATER INLET WITH THERMOSTAT) - SERVICE DATA
| Standard valve opening temperature | 80 to 84°C (176 to 183°F) |
| Standard valve lift | 10.0 mm (0.394 in) or more at 95°C (203°F) |
Cooling fan motor
2UR-GSE COOLING (COOLING FAN MOTOR) - SERVICE DATA
| Standard current (Cooling fan motor) |
Fan operates when A/C switch is turned ON (MAX COOL) | 2 to 22 A |
| Standard current (No. 2 cooling fan motor) |
Fan operates when A/C switch is turned ON (MAX COOL) | 2 to 22 A |
| Standard current (Cooling fan motor) |
Fan operates when engine coolant temperature sensor connector is disconnected | 2 to 22 A |
| Standard current (No. 2 cooling fan motor) |
Fan operates when engine coolant temperature sensor connector is disconnected | 2 to 22 A |
| Standard current (Cooling fan motor) |
Wile the motor is turning at 20°C (68°F) when battery voltage is 12 V | 18.0 to 22.0 A |
| Standard current (No. 2 cooling fan motor) |
Wile the motor is turning at 20°C (68°F) when battery voltage is 12 V | 18.0 to 22.0 A |
Cooling fan relay
2UR-GSE COOLING (COOLING FAN RELAY) - SERVICE DATA
| 3-5 | 10 MΩ or higher |
| 3-5 | Below 1 Ω (when battery voltage is applied to terminals 1 and 2) |
Radiator cap (standard judgment criterion)
2UR-GSE COOLING (RADIATOR CAP) - SERVICE DATA
| Standard valve (for brand-new cap) |
93 to 123 kPa (1.0 to 1.2 kgf/cm2 , 13.5 to 17 8 psi) |
| Minimum standard valve (after using cap) |
79 kPa (0.8 kgf/cm2 , 11.4 psi) |