Torque Specifications
2UR-GSE INTAKE AND EXHAUST - TORQUE SPECIFICATIONS
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| V-bank cover bracket sub-assembly x Intake air surge tank assembly | 10 | 102 | 7 | |
| Union to check valve hose bracket x Intake air surge tank assembly | 10 | 102 | 7 | |
| Intake air surge tank assembly x Cylinder head sub-assembly | 21 | 214 | 15 | |
| Injectors with delivery pipe assembly x Intake air surge tank assembly | 21 | 214 | 15 | |
| No. 1 vacuum switching valve assembly x Intake air surge tank assembly | 21 | 214 | 15 | |
| Water by-pass pipe x Intake air surge tank assembly | 10 | 102 | 7 | |
| Injector driver x Intake air surge tank assembly | 10 | 102 | 7 | |
| Engine wire x Cylinder head cover sub-assembly | 10 | 102 | 7 | |
| Ground cable x Timing chain cover sub-assembly | 55 | 56 | 49 in*lbf | |
| Wire harness x Relay box | 10 | 102 | 7 | |
| Wire harness x Generator (+B) | 12 | 122 | 9 | |
| Oil cooler tube sub-assembly x Cylinder block | Bolt | 10 | 102 | 7 |
| nut | 70 | 71 | 62 in*lbf | |
| No. 3 exhaust manifold heat insulator x Cylinder block | 10 | 102 | 7 | |
| Oil cooler tube sub-assembly x Cylinder block | 10 | 102 | 7 | |
| Exhaust manifold sub-assembly x Cylinder block | 21 | 214 | 15 | |
| Exhaust manifold heat insulator x Cylinder block | 10 | 102 | 7 | |
| Tail exhaust pipe assembly x Front exhaust pipe assembly | 43 | 440 | 32 | |
| Front exhaust pipe assembly x Exhaust manifold sub-assembly | 39 | 398 | 29 | |
| Heated oxygen sensors x Front exhaust pipe assembly | with SST | 40 | 408 | 30 |
| without SST | 44 | 449 | 32 | |
| Front center floor brace x Body | 74 | 76 | 66 in*lbf | |
| Rear No. 1 floor panel brace x Body | 19 | 194 | 14 | |
| Exhaust pipe damper x Tail exhaust pipe assembly | 19 | 194 | 14 | |