Transmission Wire: Removal

REMOVE NO. 2 ENGINE UNDER COVER
REMOVE NO. 1 EXHAUST PIPE SUPPORT BRACKET SUB-ASSEMBLY (See REMOVAL )
DRAIN AUTOMATIC TRANSMISSION FLUID (See REMOVAL )
REMOVE AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY (See REMOVAL )
REMOVE VALVE BODY OIL STRAINER ASSEMBLY (See REMOVAL )
REMOVE TRANSMISSION VALVE BODY ASSEMBLY (See DISASSEMBLY )
REMOVE TRANSMISSION WIRE
1. Disconnect the 3 speed sensor connectors.
  
  Fig 1: Locating Speed Sensor Connectors
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Disconnect the wire connector
  HINT:
  
  Detach the claw, press down the lever, and then disconnect the transmission wire connector.
  
  Fig 2: Pressing Down Lever
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Using a 10 mm union nut wrench, remove the bolt and pull out the transmission wire.
4. Remove the O-ring from the transmission wire connector.
  
  Fig 3: Pulling Out Transmission Wire
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002