Installation

CRUISE CONTROL: OBJECT RECOGNITION ECU: INSTALLATION

INSTALLATION





1. INSTALL OBJECT RECOGNITION ECU
(a) Attach the 2 clips to install the ECU.
(b) Install the 2 bolts.
Torque: 7.4 Nm (76 kgf-cm, 66 in-lbf)
(c) Connect the 2 connectors.
NOTE: Do not use an ECU which has been dropped or subjected to any strong shocks.

2. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH Installation

3. INSTALL LUGGAGE COMPARTMENT TRIM COVER FRONT Installation

4. INSTALL ROPE HOOK Installation

5. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY Installation

6. INSTALL REAR FLOOR FINISH PLATE Installation

7. INSTALL DECK TRIM SIDE BOARD RH Installation

8. INSTALL ROPE HOOK ASSEMBLY Installation

9. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Installation

10. ADJUST OBJECT RECOGNITION CAMERA Adjustments