Installation

AA80E AUTOMATIC TRANSMISSION: TCM: INSTALLATION

INSTALLATION





1. INSTALL TCM
(a) Install the TCM with the 2 nuts.
Torque: 5.5 Nm (56 kgf-cm, 48 in-lbf)
(b) Connect the 4 connectors.






2. INSTALL ENGINE ROOM ECU COVER
(a) Install the engine room ECU cover with the 3 bolts.
Torque: 7.8 Nm (80 kgf-cm, 69 in-lbf)
3. INSTALL ENGINE ROOM SIDE COVER LH
4. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY
(a) Install the air cleaner inlet cover with the 2 clips.
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
6. INSTALL COWL TOP VENTILATOR LOUVER Installation

7. CHECK AUTOMATIC TRANSMISSION SYSTEM PRECAUTION
(a) After replacing the TCM, certain procedures are necessary Service Precautions.
8. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.