Inspection Procedure

1. Check for the DTC (see DTC CHECK/CLEAR  ).

   Result: 

   RESULT REFERENCE TABLE
   
   

   Result	Proceed to
   CAN communication system DTC is not output	A
   CAN communication system DTC is output	B

B: Go to  CAN COMMUNICATION SYSTEM 

A: Go to next step 

1. Operate the Techstream according to the display and select "Active Test".

   OK: Needle indication is normal. 

   Combination meter: 

   ACTIVE TEST REFERENCE TABLE
   
   

   Tester Display	Test Part	Control Range
   Speed Meter Operation	Speedometer	0, 40, 80, 120, 160, 200, 240 or 280

   HINT:

   • Confirm that the vehicle is stopped and engine is idling. It is normal that door will be locked automatically when performing the speedometer Active Test.
   • The displayed value has the same units (km/h, mph) as the main scale of the vehicle's speedometer.
   • The needle position should be within the acceptable tolerance.

NG: REPLACE NO. 1 METER ECU  (See DISASSEMBLY  )

OK: Go to next step 

1. Operate the Techstream according to the display and select "Data List".

   OK: Vehicle speed displayed on Techstream is almost the same as actual vehicle speed measured using speedometer tester (calibrated chassis dynamometer). 

   Combination Meter: 

   MEASUREMENT ITEM/RANGE TABLE
   
   

   Tester Display	Measurement Item/Range	Normal Condition	Diagnostic Note
   Speed Meter	Vehicle speed/Min.: 0 (0), Max.: 255 (158)	Almost same as actual speed (When driving)	Unit: km/h (mph)

NG: Go to step   4 

OK: REPLACE NO. 1 METER ECU  (See DISASSEMBLY  )

1. Operate the Techstream according to the display and select "Data List".

   OK: Vehicle speed displayed on Techstream is almost the same as actual vehicle speed measured using speedometer tester (calibrated chassis dynamometer). 

   Electric parking brake; 

   MEASUREMENT ITEM/RANGE TABLE
   
   

   Tester Display	Measurement Item/Range	Normal Condition	Diagnostic Note
   (FL/FR/RL/RR) Wheel Speed	Wheel speed sensor (FL/FR/RL/ RR) reading /Min.: 0 (0), Max.: 326 (202)	Actual wheel speed	Similar speed as indicated on speedometer

NG: Go to  ELECTRONICALLY CONTROLLED BRAKE SYSTEM 

OK: REPLACE NO. 1 METER ECU  (See DISASSEMBLY  )