Engine Coolant Temperature Sensor: Removal
- REMOVE V-BANK COVER SUB-ASSEMBLY
(See REMOVAL
)
- REMOVE AIR CLEANER INLET COVER
(See REMOVAL
)
- REMOVE NO. 1 AIR CLEANER INLET
(See REMOVAL
)
- REMOVE NO. 1 ENGINE UNDER COVER
(See
COOLANT
)
- DRAIN ENGINE COOLANT
(See
COOLANT
)
- REMOVE ENGINE COOLANT TEMPERATURE SENSOR
- Disconnect the engine coolant temperature sensor connector.
- Remove the engine coolant temperature sensor.
- Remove the gasket from the engine coolant temperature sensor.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002