System Description

POWER SHOULDER BELT ANCHORAGE SYSTEM DESCRIPTION
1. The position of the power adjustable shoulder belt anchor can be adjusted by operating the control switch, which is located on the door trim.

FUNCTION OF MAN COMPONENT

Components	Function
Power Seat Switch	When set switch and memory switch are pressed simultaneously, SET and 1, 2 or 3 switches are input to front door ECU LH and driver side shoulder belt anchor position is recorded.
Seat Memory Switch	When memory switch is pressed, 1, 2 or 3 switch is input to front door ECU LH and driver side shoulder belt anchor position changes according to memory.
Shoulder Belt Anchor LH	Upon receiving signals from rear junction block ECU, motor operates and driver side shoulder belt anchor position moves up and down.
Shoulder Belt Anchor RH	Upon receiving signals from rear junction block ECU, motor operates and passenger side shoulder belt anchor position moves up and down.
Shoulder Belt Anchorage Switch LH	Anchor adjustment signal is input to front door ECU LH by operating this switch and driver side shoulder belt anchor position can be adjusted.
Shoulder Belt Anchorage Switch RH	Anchor adjustment signal is input to front door ECU RH by operating this switch and passenger side shoulder belt anchor position can be adjusted.

POWER SHOULDER BELT ANCHORAGE FUNCTION
1. The shoulder belt anchorage switch is located on the front door trim. Using the switch, the shoulder belt anchor position can be adjusted electrically. Linked with the seat memory system and steering memory system, the shoulder belt anchor position can also be recorded in the memory.