LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> LS 460 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle >> Floor Shift Assembly >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Floor Shift Assembly: Inspection

  1. INSPECT TRANSMISSION CONTROL SWITCH 
    1. Measure the resistance between each terminal of the shift lock control unit assembly when the shift lever is moved to each position.

      Standard Resistance 

      RESISTANCE REFERENCE

      Tester Connection Shift Lever Position Specified Condition
      3 (IG) - 7 (S) S, "+" and "-" Below 1 Ω
      2 (SFTU) - 5 (E) Continuously shift to (Up-shift) Below 1 Ω
      1 (SFTD) - 5 (E) Continuously shift to "-ii (Down-shift) Below 1 Ω
      3 (IG) - 7 (S) Not on S, "+" and "-" 10 kΩ or higher
      2 (SFTU) - 5 (E) S 10 kΩ or higher
      1 (SFTD) - 5 (E) S 10 kΩ or higher

      If the resistance value is not as specified, replace the transmission floor shift assembly.

      Fig 1: Identifying Transmission Control Switch Connector Terminals
      G04948536Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals