LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> LS 460L >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Multiplex Communication >> Lin Communication System >> Data List/Active Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Data List/Active Test

  1. DATA LIST 

    HINT:

    Using the Techstream to read the Data List allows values or status of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    NOTE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG) and turn the Techstream on.
    3. Enter the following menus: Body Electrical / (desired system) / Data List.
    4. According to the display on the Techstream, read the "Data List".

    Main Body: 

    DATA LIST TABLE

    Tester Display Measurement Item/Range Normal Condition Diagnostic Note
    Communication D-Door Motor Connection status between power window regulator motor (for driver side) and main body ECU / OK or STOP OK: Connection
    STOP: No connection
    When there is malfunction, DTC is output
    Communication P-Door Motor Connection status between power window regulator motor (for front passenger side) and main body ECU / OK or STOP OK: Connection
    STOP: No connection
    When there is malfunction, DTC is output
    Communication RR-Door Motor Connection status between power window regulator motor (for rear RH) and main body ECU / OK or STOP OK: Connection
    STOP: No connection
    When there is malfunction, DTC is output
    Communication RL-Door Motor Connection status between power window regulator motor (for rear LH) and main body ECU / OK or STOP OK: Connection
    STOP: No connection
    When there is malfunction, DTC is output
    Communication Slide Roof Connection status between sliding roof ECU and main body ECU / OK or STOP OK: Connection
    STOP: No connection
    When there is malfunction, DTC is output
    Communication Master SW Connection status between power window ECU (master switch) and main body ECU / OK or STOP OK: Connection
    STOP: No connection
    When there is malfunction, DTC is output

    Body No.5: 

    BODY NO.5 - DATA LIST TABLE

    Tester Display Measurement Item/Range Normal Condition Diagnostic Note
    LIN Communication Status of LIN communication / Without or With Without: No connection
    With: Connection
    -
    Curr Comm Rain Sensor Current communication with rain sensor / OK or Stop OK: Connection
    Stop: No connection
    -
    Hist Comm Rain Sensor History communication with rain sensor / OK or Stop OK: Connection
    Stop: No connection
    -

    Body No.4: 

    BODY NO.4 - DATA LIST TABLE

    Tester Display Measurement Item/Range Normal Condition Diagnostic Note
    LIN Communication Status of LIN communication / Without or With Without: No connection
    With: Connection
    When there is malfunction, DTC is output

    D-SEAT SW: 

    D-SEAT SW - DATA LIST TABLE

    Tester Display Measurement Item/Range Normal Condition Diagnostic Note
    Communication FR Seat A/C Current communication with seat climate control controller RH (for driver side) / WITHOUT or WITH WITHOUT: No connection
    WITH: Connection
    When there is malfunction, DTC is output
    Communication FL Seat A/C Current communication with seat climate control controller LH (for front passenger side) / WITHOUT or WITH WITHOUT: No connection
    WITH: Connection
    When there is malfunction, DTC is output
    Communication Center Console Switch Current communication with No. 1 console switch / WITHOUT or WITH WITHOUT: No connection
    WITH: Connection
    When there is malfunction, DTC is output

    Rear Console Switch: 

    REAR CONSOLE SWITCH - DATA LIST TABLE

    Tester Display Measurement Item/Range Normal Condition Diagnostic Note
    Communication RR Seat Current communication with position control ECU (for rear RH) /WITHOUT or WITH WITHOUT: No connection
    WITH: Connection
    When there is malfunction, DTC is output
    Communication RL Seat Current communication with position control ECU (for rear LH) / WITHOUT or WITH WITHOUT: No connection
    WITH: Connection
    When there is malfunction, DTC is output
    Communication RR Seat A/C Current communication with seat climate control controller RH (for rear RH) / WITHOUT or WITH WITHOUT: No connection
    WITH: Connection
    When there is malfunction, DTC is output
    Communication RL Seat A/C Current communication with seat climate control controller LH (for rear LH) / WITHOUT or WITH WITHOUT: No connection
    WITH: Connection
    When there is malfunction, DTC is output