Driving Support Ecu: Installation

HINT:

A bolt without a torque specification is shown in the standard bolt table (see SPECIFIED TORQUE FOR STANDARD BOLTS ).

1. INSTALL DRIVING SUPPORT ECU 
   1. Install the ECU with the nut.
   Fig 1: Locating Driving Support ECU Nuts
   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   NOTE:

   • Do not use an ECU which has been dropped or subjected to any strong shocks.
   • During the removal and installation, do not remove the drip-proof cover.
   • When a new ECU is installed, perform INITIALIZATION .
2. INSTALL DASH PANEL EXTENSION LH 
   1. Install the dash panel extension with the 2 nut and bolt.
   Fig 2: Locating Dash Panel Extension With Nut & Bolt
   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Connect the connector.
   3. Attach the clamp.
3. INSTALL COWL SIDE TRIM BOARD LH  (See INSTALLATION )
4. INSTALL FRONT DOOR SCUFF PLATE LH  (See INSTALLATION )