LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> LS 460L >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior >> Front Console Box >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Console Box: Removal

  1. REMOVE INSTRUMENT PANEL FINISH PANEL END LH 
    1. Using a molding remover, detach the 8 clips and claw.
    2. Remove the finish panel.
  2. REMOVE INSTRUMENT PANEL FINISH PANEL END RH 
    1. Using a molding remover, detach the 8 clips and claw.
    2. Remove the finish panel.
      3. Fig 1: Identifying Instrument Panel Finish Panel RH Clips & Claw
      G04946856Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY 
    1. Twist the shift lever knob in the direction indicated by the arrow and remove it.
      Fig 2: Identifying Shift Lever Knob Sub-Assembly
      G04946857Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE NO. 3 BOX PANEL 
    1. Using a screwdriver, detach the 4 claws.

      HINT:

      Tape the screwdriver tip before use.

    2. Remove the box panel.
      3. Fig 3: Identifying Box Panel Claws
      G05857602Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE REAR CONSOLE PANEL UPPER 
    1. Place protective tape as shown below.
    2. Move the shift lever to N.
    3. Remove the 2 screws.
    4. Using a screwdriver, detach the 6 clips.

      HINT:

      Tape the screwdriver tip before use.

    5. Remove the panel and disconnect the connectors.
      6. Fig 4: Identifying Rear Console Panel Upper Clips
      G04946859Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE CONSOLE PANEL SUB-ASSEMBLY UPPER 
    1. Place protective tape as shown below.
    2. Detach the 2 clips.
    3. Remove the console panel and disconnect the connector.
      4. Fig 5: Identifying Console Panel Clips
      G04946860Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY 
    1. Using a molding remover, detach the 5 clips and 2 claws.
    2. Remove the end panel and disconnect the connector.
      3. Fig 6: Identifying Console Cover Lower Clips & Claws
      G04946861Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. REMOVE CONSOLE COVER LOWER 
    1. Remove the cover.
  9. REMOVE CONSOLE BOX ASSEMBLY 
    1. Remove the 4 bolts and 2 screws.
    2. Disconnect the connectors.
    3. Detach the 2 claws and remove the console box.
      4. Fig 7: Identifying Console Box With Bolts & Screws
      G04946862Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals