System Description
- FRONT POWER SEAT CONTROL SYSTEM DESCRIPTION
- The driver seat is equipped with slide, reclining, lifter, front vertical, lumbar support, headrest and cushion slide adjustment functions.
- The passenger seat is equipped with slide, reclining, lifter, front vertical, headrest, and lumbar support adjustment functions.
- The memory system for the driver seat is provided as standard equipment.
- The memory call function uses the key ID code of the key to memorize and reproduce the appropriate driving position for each individual who possesses a master key or sub key.
- FUNCTION OF MAIN COMPONENT
The following functions are available.
FUNCTIONS CHARTComponents Function Seat slide motor Receives signal from front power seat switch, motor operates, and seat slides forward and rearward. Seat reclining motor Receive signal from front power seat switch, motor operates, and seat tilts and reclines. Seat cushion slide motor Receive signal from front power seat switch, motor operates, and driver side seat cushion slides. Seat front vertical motor Receive signal from front power seat switch, and seat cushion front raises and lowers vertically. Seat lifter motor Receive signal from front power seat switch, and seat cushion raises and lowers vertically. Seat lumbar support motor (forward - back) Receive signal from front power seat switch, and lumbar support can be adjusted. Seat lumbar support motor (up - down) Receive signal from front power seat switch, and driver side seat lumbar support can be adjusted. Seat headrest height motor Receive signal from front power seat switch, and headrest raises and lowers. Seat position sensor Is built into each seat adjuster and sends position data to front power seat switch so that it can detect seat positions at all times. Seat control switch Based on switches operated, seat adjuster signals are input into position control ECU and seat is adjusted accordingly. Seat memory switch When SET switch and memory switch are pressed simultaneously, signal is input to front door ECU and seat position is recorded. Then, when memory switch is pressed, signal is input to front door ECU and seat position changes according to memory. - SYSTEM OPERATION
The front power seat's adjustment and position memory are shown in the chart below.
FRONT POWER SEAT ADJUSTMENT FUNCTION CHARTSeat Adjustment Function Driver Passenger Fore-and-Aft Slide Power and memory Power and memory Reclining Power and memory Power and memory Cushion Slide Power and memory - Front Vertical Height Power and memory Power Lifter Power and memory Power and memory Lumbar Support (forward - back) Power Power Lumbar Support (up - down) Power - Headrest Height Power and memory Power and memory For the memory function, the memory switch operation is first transferred from the front door ECU LH to the front power seat switch LH via the CAN communication line. Then, either the seat position is recorded in memory or a previously recorded seat position is recalled.