How To Proceed With Troubleshooting

HINT:

Use these procedures to troubleshoot the seat vibration system.

1. VEHICLE BROUGHT TO WORKSHOP 
2. INSPECT BATTERY 

   Standard Voltage: 

   11 to 14 V 

   If the voltage is below 11 V, recharge or replace the battery before proceeding.

3. PROBLEM SYMPTOMS TABLE 

   Result 

   RESULT CHART
   
   

   Result	Proceed to
   Fault is not listed in problem symptoms table	A
   Fault is listed in problem symptoms table	B

   B: Go to step  5

   A: Go to next step 

4. OVERALL ANALYSIS AND TROUBLESHOOTING 
   1. Operation Check (see OPERATION CHECK  )
   2. ACTIVE TEST (see DATA LIST / ACTIVE TEST  )
   3. Terminals of ECU (see TERMINALS OF ECU  )
5. ADJUST, REPAIR OR REPLACE 
6. CONFIRMATION TEST 

   NEXT: END