Rear Power Window Switch: Removal

HINT:

• Use the same procedures for the LH side and RH side.
• The procedures listed below are for the RH side.

1. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY 
   1. Using a screwdriver, detach the 2 clamps.

      HINT:

      Tape the screwdriver tip before use.

   2. Detach the armrest base panel assembly.
      Fig 1: Detaching Rear Power Window Regulator Switch Assembly Clamps

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   3. Disconnect the connector.
      Fig 2: Locating Connector

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   4. Detach the 2 claws and remove the power window regulator switch assembly.
      Fig 3: Identifying Power Window Regulator Switch Assembly Claws

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002